View source for G3 to S3 State for Ivy Bridge Haswell and Broadwell

Please note, if you have pulsing PM_SLP_S4, you likely have a problem after this chart.  Please refer to [[820-00165 Pulsing]].  After this chart please refer to [[Bootup Signal Order|S3 to S0 State for Ivy Bridge Haswell and Broadwell]]

{{#drawio:G3 - S3 Ivy Bridge - Broadwell|type=png|width=chart|height=chart}}<br>

You can edit the above draw.io diagram in place by clicking the edit button closest to its top right.

The following files are the original source files from Piernov.  I converted them to draw.io in order to create an easy to edit online version with revision history.  Please use the talk page here to discuss changes if needed.<br>

[[File:G3-S3 Ivy Bridge - Broadwell.dia.gz]]<br>
[[Media:G3-S3_Ivy_Bridge_-_Broadwell.png]]

==Errata==
On 820-3115, PM_SLP_SUS_L can come up without PCH_SRTCRST_L and RTC_RESET_L (and PCH_INTRUDER_L) but they are required for PM_SLP_S5_L.

[[Category:Mac]] 
[[Category:MacBook]] 
[[Category:MacBook Air]]
[[Category:Troubleshooting Guide]]