# Chair

^(From Wikipedia, the free encyclopedia)



Chair, circa 1772, [mahogany](https://www.reddit.com/wiki/Mahogany), covered in modern red morocco leather, height: 97.2 cm, [Metropolitan Museum of Art](https://www.reddit.com/wiki/Metropolitan_Museum_of_Art) (New York City)

A bronze chair leg (dating back to 12th century), from Angkor (Cambodia) and crafted in [Angkor Wat](https://www.reddit.com/wiki/Angkor_Wat) style
One of the basic pieces of [furniture](https://www.reddit.com/wiki/Furniture), a **chair** is a type of [seat](https://www.reddit.com/wiki/Seat). Its primary features are two pieces of a durable material, attached as back and seat to one another at a 90° or slightly greater angle, with usually the four corners of the horizontal seat attached in turn to four legs—or other parts of the seat’s underside attached to three legs or to a shaft about which a four-arm turnstile on rollers can turn—strong enough to support the weight of a person who sits on the seat (usually wide and broad enough to hold the lower body from the buttocks almost to the knees) and leans against the vertical back (usually high and wide enough to support the back to the shoulder blades). The legs are typically high enough for the seated person’s thighs and knees to form a 90° or lesser angle.[\[1\]](https://www.reddit.com/r/copypasta/submit#cite_note-1)[\[2\]](https://www.reddit.com/r/copypasta/submit#cite_note-2) Used in a number of rooms in homes (e.g. in [living rooms](https://www.reddit.com/wiki/Living_room), [dining rooms](https://www.reddit.com/wiki/Dining_room), and [dens](https://www.reddit.com/wiki/Den_(room))), in schools and offices (with [desks](https://www.reddit.com/wiki/Desk)), and in various other workplaces, chairs may be made of wood, metal, or synthetic materials, and either the seat alone or the entire chair may be padded or [upholstered](https://www.reddit.com/wiki/Upholstery) in various colors and fabrics. Chairs vary in design. An **armchair** has armrests fixed to the seat;[\[3\]](https://www.reddit.com/r/copypasta/submit#cite_note-3) a [**recliner**](https://www.reddit.com/wiki/Recliner) is upholstered and under its seat is a mechanism that allows one to lower the chair’s back and raise into place a fold-out footrest;[\[4\]](https://www.reddit.com/r/copypasta/submit#cite_note-4) a rocking chair has legs fixed to two long curved slats; a [wheelchair](https://www.reddit.com/wiki/Wheelchair) has wheels fixed to an axis under the seat.[\[5\]](https://www.reddit.com/r/copypasta/submit#cite_note-5) Contents
[1Etymology](https://www.reddit.com/r/copypasta/submit#Etymology)[2History](https://www.reddit.com/r/copypasta/submit#History)[3Materials](https://www.reddit.com/r/copypasta/submit#Materials)[4Design and ergonomics](https://www.reddit.com/r/copypasta/submit#Design_and_ergonomics)[4.1Armrests](https://www.reddit.com/r/copypasta/submit#Armrests)[5Seats](https://www.reddit.com/r/copypasta/submit#Seats)[6Standards and specifications](https://www.reddit.com/r/copypasta/submit#Standards_and_specifications)[7Accessories](https://www.reddit.com/r/copypasta/submit#Accessories)[8As sculptural and art forms](https://www.reddit.com/r/copypasta/submit#As_sculptural_and_art_forms)[9In language](https://www.reddit.com/r/copypasta/submit#In_language)[10See also](https://www.reddit.com/r/copypasta/submit#See_also)[11References](https://www.reddit.com/r/copypasta/submit#References)[12Further reading](https://www.reddit.com/r/copypasta/submit#Further_reading)
Etymology*Chair* comes from the early 13th-century English word *chaere*, from Old French *chaiere* (“chair, seat, throne”), from Latin *cathedra* (“seat”).[\[6\]](https://www.reddit.com/r/copypasta/submit#cite_note-etymonline.com-6) HistoryMain article: [History of the chair](https://www.reddit.com/wiki/History_of_the_chair)
Five three-legged chairs around a low-legged table from [Sliven](https://www.reddit.com/wiki/Sliven) 19th Century Lifestyle Museum
Early 20th-century armchair made in eastern [Australia](https://www.reddit.com/wiki/Australia), with strong [heraldic](https://www.reddit.com/wiki/Heraldic) embellishment
The chair has been used since antiquity, although for many centuries it was a symbolic article of state and dignity rather than an article for ordinary use. “The chair” is still used as the emblem of authority in the [House of Commons](https://www.reddit.com/wiki/House_of_Commons) in the [United Kingdom](https://www.reddit.com/wiki/United_Kingdom)[\[7\]](https://www.reddit.com/r/copypasta/submit#cite_note-7) and Canada,[\[8\]](https://www.reddit.com/r/copypasta/submit#cite_note-8) and in many other settings. In keeping with this historical connotation of the “chair” as the symbol of authority, committees, boards of directors, and academic departments all have a ‘chairman’ or ‘chair’.[\[9\]](https://www.reddit.com/r/copypasta/submit#cite_note-9) Endowed professorships are referred to as chairs.[\[10\]](https://www.reddit.com/r/copypasta/submit#cite_note-10) It was not until the 16th century that chairs became common.[\[11\]](https://www.reddit.com/r/copypasta/submit#cite_note-11) Until then, people sat on [chests](https://www.reddit.com/wiki/Chest_(furniture)), [benches](https://www.reddit.com/wiki/Bench_(furniture)), and stools, which were the ordinary seats of everyday life. The number of chairs which have survived from an earlier date is exceedingly limited; most examples are of [ecclesiastical](https://www.reddit.com/wiki/Ecclesiastical), [seigneurial](https://www.reddit.com/wiki/Manorialism) or [feudal](https://www.reddit.com/wiki/Feudalism) origin.\[[*citation needed*](https://www.reddit.com/wiki/Wikipedia:Citation_needed)\] Chairs were in existence since at least the [Early Dynastic Period of Egypt](https://www.reddit.com/wiki/Early_Dynastic_Period_of_Egypt) (c. 3100 BC). They were covered with cloth or leather, were made of carved wood, and were much lower than today’s chairs – chair seats were sometimes only 10 inches (25 cm) high.[\[12\]](https://www.reddit.com/r/copypasta/submit#cite_note-reshafim-12) In ancient [Egypt](https://www.reddit.com/wiki/Egypt) chairs appear to have been of great richness and splendor. Fashioned of ebony and ivory, or of carved and [gilded](https://www.reddit.com/wiki/Gilded) [wood](https://www.reddit.com/wiki/Wood), they were covered with costly materials, magnificent patterns and supported upon representations of the legs of beasts or the figures of captives. Generally speaking, the higher ranked an individual was, the taller and more sumptuous was the chair he sat on and the greater the honor. On state occasions the pharaoh sat on a [throne](https://www.reddit.com/wiki/Throne), often with a little footstool in front of it.[\[13\]](https://www.reddit.com/r/copypasta/submit#cite_note-13) The average Egyptian family seldom had chairs, and if they did, it was usually only the master of the household who sat on a chair. Among the better off, the chairs might be painted to look like the ornate inlaid and carved chairs of the rich, but the craftsmanship was usually poor.[\[12\]](https://www.reddit.com/r/copypasta/submit#cite_note-reshafim-12)
The [Monobloc](https://www.reddit.com/wiki/Monobloc_(chair)) chair is a lightweight stackable [polypropylene](https://www.reddit.com/wiki/Polypropylene) chair, usually [white](https://www.reddit.com/wiki/White) in colour, often described as the world’s most common [plastic](https://www.reddit.com/wiki/Plastic) chair.[\[14\]](https://www.reddit.com/r/copypasta/submit#cite_note-14)
The earliest images of chairs in China are from sixth-century Buddhist murals and [stele](https://www.reddit.com/wiki/Stele), but the practice of [sitting](https://www.reddit.com/wiki/Sitting) in chairs at that time was rare. It wasn’t until the twelfth century that chairs became widespread in China. Scholars disagree on the reasons for the adoption of the chair. The most common theories are that the chair was an outgrowth of indigenous Chinese furniture, that it evolved from a camp stool imported from Central Asia, that it was introduced to China by Christian missionaries in the seventh century, and that the chair came to China from India as a form of Buddhist monastic furniture. In modern China, unlike Korea or Japan, it is no longer common to sit at floor level.[\[15\]](https://www.reddit.com/r/copypasta/submit#cite_note-15) In Europe, it was owing in great measure to the [Renaissance](https://www.reddit.com/wiki/Renaissance) that the chair ceased to be a privilege of state and became a standard item of furniture for anyone who could afford to buy it. Once the idea of privilege faded the chair speedily came into general use. Almost at once the chair began to change every few years to reflect the fashions of the day.[\[16\]](https://www.reddit.com/r/copypasta/submit#cite_note-16) In the 1880s, chairs became more common in American households and usually there was a chair provided for every family member to sit down to dinner. By the 1830s, factory-manufactured “fancy chairs” like those by Sears. Roebuck, and Co. allowed families to purchase machined sets. With the Industrial Revolution, chairs became much more available.[\[17\]](https://www.reddit.com/r/copypasta/submit#cite_note-17)
The Sacco chair, designed in 1968, is now the basis of [bean bag chairs](https://www.reddit.com/wiki/Bean_bag_chair)
The 20th century saw an increasing use of technology in chair construction with such things as all-metal folding chairs, metal-legged chairs, the [Slumber Chair](https://www.reddit.com/w/index.php?title=Slumber_Chair&action=edit&redlink=1),\[[*citation needed*](https://www.reddit.com/wiki/Wikipedia:Citation_needed)\] moulded plastic chairs and ergonomic chairs.[\[18\]](https://www.reddit.com/r/copypasta/submit#cite_note-18) The recliner became a popular form, at least in part due to radio and television. The modern movement of the 1960s produced new forms of chairs: the [butterfly chair](https://www.reddit.com/wiki/Butterfly_chair) (originally called the Hardoy chair), [bean bags](https://www.reddit.com/wiki/Bean_bag#Furniture), and the [egg-shaped pod chair](https://www.reddit.com/wiki/Egg_(chair)) that turns. It also introduced the first mass-produced plastic chairs such as the Bofinger chair in 1966.[\[19\]](https://www.reddit.com/r/copypasta/submit#cite_note-19) Technological advances led to molded [plywood](https://www.reddit.com/wiki/Plywood) and wood [laminate](https://www.reddit.com/wiki/Laminate) chairs, as well as chairs made of [leather](https://www.reddit.com/wiki/Leather) or [polymers](https://www.reddit.com/wiki/Polymers). Mechanical technology incorporated into the chair enabled adjustable chairs, especially for [office](https://www.reddit.com/wiki/Office_chair) use. Motors embedded in the chair resulted in [massage chairs](https://www.reddit.com/wiki/Massage_chair).[\[20\]](https://www.reddit.com/r/copypasta/submit#cite_note-20) Materials
Metal chairs in the [Tuileries Garden](https://www.reddit.com/wiki/Tuileries_Garden), [Paris](https://www.reddit.com/wiki/Paris), France
Chairs can be made from wood, metal, or other strong materials, like stone or acrylic. In some cases, multiple materials are used to construct a chair; for example, the legs and frame may be made from metal and the seat and back may be made from plastic. Chairs may have hard surfaces of wood, metal, plastic, or other materials, or some or all of these hard surfaces may be covered with upholstery or padding. The design may be made of [porous](https://www.reddit.com/wiki/Porous) materials, or be [drilled](https://www.reddit.com/wiki/Drilling) with holes for decoration; a low back or gaps can provide [ventilation](https://www.reddit.com/wiki/Ventilation_(architecture)). The back may extend above the height of the occupant’s head, which can optionally contain a headrest. Chairs can also be made from more creative materials, such as recycled materials like cutlery and wooden play bricks, pencils, plumbing tubes, rope, [corrugated cardboard](https://www.reddit.com/wiki/Corrugated_cardboard), and [PVC pipe](https://www.reddit.com/wiki/PVC_pipe).[\[21\]](https://www.reddit.com/r/copypasta/submit#cite_note-21) In rare cases, chairs are made out of unusual materials, especially as a form of art or experimentation. Raimonds Cirulis, a Latvian interior designer, created a volcanic hanging chair that is a handmade out of volcanic rock.[\[22\]](https://www.reddit.com/r/copypasta/submit#cite_note-22)[\[23\]](https://www.reddit.com/r/copypasta/submit#cite_note-23) Peter Brenner, a Dutch-born German designer, has created a chair made from lollipop sugar – 60 pounds (27 kg) of confectioners’ sugar.[\[24\]](https://www.reddit.com/r/copypasta/submit#cite_note-24) Design and ergonomics
[S Chair](https://www.reddit.com/wiki/Panton_Chair), designed by [Verner Panton](https://www.reddit.com/wiki/Verner_Panton)


The difference between leg room and seat pitch
Chair design considers intended usage, [ergonomics](https://www.reddit.com/wiki/Ergonomic) (how comfortable it is for the occupant),[\[25\]](https://www.reddit.com/r/copypasta/submit#cite_note-25) as well as non-ergonomic functional requirements such as size, stacking ability, folding ability, weight, [durability](https://www.reddit.com/wiki/Durability), stain resistance, and artistic design. Intended usage determines the desired seating position. “Task chairs”, or any chair intended for people to work at a desk or table, including dining chairs, can only recline very slightly; otherwise the occupant is too far away from the desk or table. [Dental chairs](https://www.reddit.com/wiki/Dental_chair) are necessarily reclined. Easy chairs for watching television or movies are somewhere in between depending on the height of the screen. Ergonomic design distributes the weight of the occupant to various parts of the [body](https://www.reddit.com/wiki/Human_body). A seat that is higher results in dangling feet and increased pressure on the underside of the knees (“[popliteal fold](https://www.reddit.com/wiki/Popliteal_fossa)”). It may also result in no weight on the feet which means more weight elsewhere. A lower seat may shift too much weight to the “seat bones” (“[ischial tuberosities](https://www.reddit.com/wiki/Ischial_tuberosities)”). A reclining seat and back will shift weight to the occupant’s back. This may be more comfortable for some in reducing weight on the seat area, but may be problematic for others who have bad backs. In general, if the occupant is supposed to sit for a long time, weight needs to be taken off the seat area and thus “easy” chairs intended for long periods of sitting are generally at least slightly reclined. However, reclining may not be suitable for chairs intended for work or eating at table. The back of the chair will support some of the weight of the occupant, reducing the weight on other parts of the body. In general, backrests come in three heights: Lower back backrests support only the [lumbar](https://www.reddit.com/wiki/Lumbar) region. Shoulder height backrests support the entire back and [shoulders](https://www.reddit.com/wiki/Shoulders). [Headrests](https://en.wiktionary.org/wiki/headrest) support the head as well and are important in vehicles for preventing “[whiplash](https://www.reddit.com/wiki/Whiplash_(medicine))” neck injuries in rear-end collisions where the head is jerked back suddenly. [Reclining chairs](https://www.reddit.com/wiki/Recliner) typically have at least shoulder-height backrests to shift weight to the shoulders instead of just the [lower back](https://www.reddit.com/wiki/Lower_back). Some chairs have foot rests. Around 15% of women and 2% of men need foot rests, even at the 16-inch (41 cm) chair height.[\[26\]](https://www.reddit.com/r/copypasta/submit#cite_note-Work2017-26) A [stool](https://www.reddit.com/wiki/Bar_stool) or other simple chair may have a simple straight or curved bar near the bottom for the sitter to place their feet on. Some chairs have two curved bands of wood (also known as rockers) attached to the bottom of the legs. They are called [rocking chairs](https://www.reddit.com/wiki/Rocking_chair).
The type of chair popular in western [Hubei](https://www.reddit.com/wiki/Hubei), China: with a fairly low seat and the back inclined at about 45 degrees from the vertical
A [kneeling chair](https://www.reddit.com/wiki/Kneeling_chair) adds an additional body part, the knees, to support the weight of the body. A sit-stand chair distributes most of the weight of the occupant to the feet. Many chairs are padded or have [cushions](https://www.reddit.com/wiki/Cushion). Padding can be on the seat of the chair only, on the seat and back, or also on any arm rests or foot rest the chair may have. Padding will not shift the weight to different parts of the body (unless the chair is so soft that the shape is altered). However, padding does distribute the weight by increasing the area of contact between the chair and the body. A hard wood chair feels hard because the contact point between the occupant and the chair is small. The same body weight over a smaller area means greater pressure on that area. Spreading the area reduces the pressure at any given point. In lieu of padding, flexible materials, such as wicker, may be used instead with similar effects of distributing the weight. Since most of the body weight is supported in the back of the seat, padding there should be firmer than the front of the seat which only has the weight of the legs to support. Chairs that have padding that is the same density front and back will feel soft in the back area and hard to the underside of the knees. There may be cases where padding is not desirable, such as chairs that are intended primarily for outdoor use. Where padding is not desirable, contouring may be used instead. A contoured seat pan attempts to distribute weight without padding. By matching the shape of the occupant’s [buttocks](https://www.reddit.com/wiki/Buttocks), weight is distributed and maximum pressure is reduced.
Churchchairs
Actual chair dimensions are determined by measurements of the human body or [anthropometric](https://www.reddit.com/wiki/Anthropometry) measurements. The two most relevant anthropometric measurement for chair design is the [popliteal height](https://www.reddit.com/wiki/Popliteal_height) and [buttock popliteal](https://www.reddit.com/wiki/Buttock_popliteal) length. For someone seated, the popliteal height is the distance from the underside of the foot to the underside of the thigh at the knees. It is sometimes called the “stool height”. The term “sitting height” is reserved for the height to the top of the head when seated. For American men, the median popliteal height is 16.3 inches (410 mm) and for American women it is 15.0 inches (380 mm).[\[27\]](https://www.reddit.com/r/copypasta/submit#cite_note-27) The popliteal height, after adjusting for heels, clothing and other issues, is used to determine the height of the chair seat. Mass-produced chairs are typically 17 inches (430 mm) high.\[[*citation needed*](https://www.reddit.com/wiki/Wikipedia:Citation_needed)\] For someone seated, the buttock popliteal length is the horizontal distance from the back most part of the buttocks to the back of the lower leg. This anthropometric measurement is used to determine the seat depth. Mass-produced chairs are typically 15–17 inches (38–43 cm) deep.\[[*citation needed*](https://www.reddit.com/wiki/Wikipedia:Citation_needed)\] Additional anthropometric measurements may be relevant to designing a chair. Research has shown that the best seated posture is a reclined posture of 100°–110°.[\[28\]](https://www.reddit.com/r/copypasta/submit#cite_note-28) Hip breadth is used for chair width and armrest width. [Elbow](https://www.reddit.com/wiki/Elbow-joint) rest height is used to determine the height of the armrests. The buttock-knee length is used to determine “leg room” between rows of chairs. “Seat pitch” is the distance between rows of seats. In some airplanes and stadiums the leg room (the seat pitch less the thickness of the seat at thigh level) is so small that it is sometimes insufficient for the average person. For adjustable chairs, such as an [office chair](https://www.reddit.com/wiki/Office_chair), the aforementioned principles are applied in adjusting the chair to the individual occupant. [Caster wheels](https://www.reddit.com/wiki/Caster) are attached to the feet of chairs to give more mobility. [Gas springs](https://www.reddit.com/wiki/Gas_spring) are attached to the body of the chair in order to give height adjustment and more comfort to the user.